-
Quality Assurance is our commitment
We place high priority on achieving uniform quality and instilling a quality-first mindset in our workforce to keep our customers satisfied. We can, with confidence and assurance, claim to be delivering “Export Worthy” products. Guided by the “Quality First” principle that Paramvir Power has stayed true to since its founding. -
Restless Innovation is our passion
We strive to be the lowest cost, highest quality manufacture & latest technology provider. Our team is always ready to accept new challenges to reach next level of achievement. We strongly believe to work restless on innovation as a social responsibility to make life more comfortable. Innovation only can help us to reduce dependency on “Technocratic Countries – e.g. Germany, Russia, Greece, Canada & other.” -
Reliable Partner
Paramvir Power engaged in engineering manufacturing services & Development of various products. Also we are into Customized Power stack solution provider, IGBT Gate Drivers, SCR Firing module, Light Trigger Thyristor firing module, active front rectifier technology provider.
{/*End Main Slider*/} {/*Start Recently Project Area*/}
ASL 220221040: Controller
Digital Signal Processor (DSP) functionality with a
high-performance 16-bit MCU ARCHITECTURE
50KW - 2MW
Product Ordering Code :
ASL 220221040, 220221041
ONLINE UPS CARD SET
ASL 220221091 / 220221092
DUAL-PROCESSOR ARCHITECTURE
25-500 KVA
Product Ordering Code :
ASL 220221091, 220221092
- TMS320F28377DPTPT 32-bit Dual Core 200 MHz CPU
- IEEE 754 single-precision Floating-Point Unit (FPU)
- Trigonometric Math Unit (TMU)
- Seamless transfer between MAINS AND BYPASS, 4ms. (Quarter Cycle)
- All Protection and Control feature is available which help user to achieve IEC-62040-3.
- 3-phase Load current sensing is available which helps user to achieve parallelling of UPS
unit in (N+1) configuration. - Direct 3-pahse voltage sensing & CAN port available which makes user to utilize Load bus
synchronization (LBS). - Built in Pulse-by-Pulse protection to derive the motor load directly without the use of
any special soft start circuitry. - Same Controller can be used in Solar inverter and BESI (Battery energy storage
inverter) from 30 to 2000 (KVA/KW) units. - With add on cards complete UL-1741 as well as IEE-1547 can be incorporated in BESI
and Grid tied inverter. - With Latest TI controller, board is already field tested with more than 10 different sites.
- Capable to generate 14 PWM pulse for 3 level inverters (Electrical)
- High Resolution PWM up to 18 bits
- Inbuilt PWM hardware Lock circuit in case of short circuit or overcurrent or overvoltage
fault. - AC overcurrent, DC overvoltage, IGBT short circuit error latching, Over temperatur
protection for heatsink, IGBT , transformers , inductors . - 6 Nos of thyristor firing possible by adding 220221095 (thyristor firing card).
SPECIAL FEATURES
FEATURES
- Inbuilt CLA
- Two CPU core in single Card.
- EMIF for fast communication.
DIMENSIONS
- Overall Size (in mm) : 274.5 x 280.0
- Mounting Hole pitch (in mm) : 264 x 270
- 3 Channel for Line-to-Line Voltage sensing 415Vrms (+/-10%)
- 6 Channel for Line-to-neutral Voltage sensing 230Vrms (+/-10%)
- 9 Channel for current sensing via hall effect sensor (0 - 4V peak)
- 1 Channel for bidirectional DC current sensing (0-4V peak)
- 2 channel for DC bus voltage sensing up to 920VDC
- 2 CAN communication port.
- 2 RS-485 Communication port available where MODBUS or any platform can be used for communication
ANALOG CHANNEL
COMMUNICATION
- 12 Digital input
- 1 Dedicated Digital Output
- 10 Digital Output (optional with external relay board)
DI/DO:
ASL 220221088
INPUT VOLTAGE SPECIFICATION
- DC voltage: +95 to 130VDC
OUTPUT VOLTAGE SPECIFICATION
- +15VDC, ±1.5% @ 3.5A
- -15VDC, ±1.5% @ 0.6A
- +12VDC, ±1.5% @ 0.8A
- +5VDC , ±1.5% @ 1.5A
- +24VDC, ±1.5% @ 1A
Notes : Customize DC bus voltage can be available up to (450Vdc) on request
25-500 KVA
Product Ordering Code :
ASL 220221088
DIMENSIONS
- L X W: 170mm X 180mm
INDUCTION PS CARD SET
ASL 220221040
MECHANICAL
ASL 220221069
MECHANICAL
*/}
INDUCTION PS CARD SET
*/}ASL 220221089
INPUT VOLTAGE SPECIFICATION
- DC voltage: +400 to 640Vdc
- AC-1: 370 to 440Vrms
- AC-2: 370 to 440Vrms
- +110VDC,±2.5% @ 1.5A
- Fully Complying the EMC requirement and prone to EMI.
- 3- different Input source ORING.
- 2-AC Voltage and 1-DC Voltage as input source is available and in case of failure of ANY
SUPPLY ALSO OUTPUT WILL BE UNITERUPPTED which makes it as Ideal choice for UPS
and energy Storage inverter. - Tested Ful short circuit at output.
- Built in Inrush current limitation on AC input via NTC available which help it to realize BALCKSTART facility.
OUTPUT VOLTAGE SPECIFICATION
FEATURES
{/*
| User Selection | WITH 10MΩ RESISTOR | |||
|---|---|---|---|---|
| 1000V/5.15V | 1500V/4.95V | 2000V/5.03V | 3000V/4.95V | |
| R3, R10, R17 | 47K | 33K | 47K | 15K |
| JP1, JP2, JP3 | 56K | 33K | 3.3K | 18K |
10KW-2MW
*/}Product Ordering Code :
ASL 220221089
DIMENSIONS
INDUCTION PS CARD SET
*/}ASL 220221095
INPUT VOLTAGE SPECIFICATION
- +15V DC ±1 % @ 500mA
- Static Thyristor Firing Pulse at frequency set by user
- Capable to Drive from 50A - 600A Module
- New Control algorithm helps to transfer from one generating source to other in <4mS.
- Fault indication & detection for thyristor Open & short condition
- Dedicated built-in Controller for smooth transfer
- Supply of +15Vand -15V is available with for bidirectional analog sensing.
OUTPUT VOLTAGE SPECIFICATION
FEATURES
10KW-2MW
*/}Product Ordering Code :
ASL 220221095
DIMENSIONS
Major Highlights on Specification (25KVA to 500 kVA UPS)
MAINS INPUT
| Nominal voltage(4) (V) | 415 (3Ph + N(4)) |
| Input voltage range without battery discharge (V) | 250(5) to 460 |
| Power factor @ nominal load & nominal input conditions(2) |
≥0.99 |
| Input current distortion @ nominal input conditions & max input current(2) (6) (%) |
<3 |
| (Walk in/Soft start seconds) | 10 (1 to 90 selectable) |
| Inrush current / Imax input | ≤1 |
| AC/DC Rectifier efficiency without Charging current @ nominal input conditions with nominal resistive load(1) (2) - Half load ≥ % - Nominal load ≥ % |
95 to 96.9
96 to 97.2 (Note: Results may vary from KVA-to-KVA and other component selections) |
BATTERY
| Permissible battery voltage range (V) | 396 (cut-off) to 700 (Boost) |
| Recommended no. of cells: - VRLA - WET - NiCd |
240 - 300 240 - 300 375 - 468 |
| Float voltage for VRLA @ 20°C (V/cell) | 2.27 |
| End cell voltage for VRLA (V/cell) | 1.65 |
| Float voltage temperature compensation | -0.11% per °C |
| Float voltage stability in steady state condition (%) | ≤1 |
| DC ripple voltage without battery (%) | ≤1 |
| Optimum battery temperature (°C) | 20 to 30 |
| Battery recharge current setting range for 240 cells @ 415V input voltage & nominal output load (PF=0.9) (A) |
Up to 10% of kva |
|
Battery recharge current setting range for 264 cells @ 400V input voltage & maximum output load (PF=1) (A) |
Up to 8 |
|
Battery output power in discharge mode with nominal output load (kW) |
KVA rating of UPS * ƞ(Charger) * ƞ(Inverter)* ƞ(Isolation x’mer (if used)) * ƞ(Cable loss) |
| End battery voltage for 240 cells(V) | 396 |
| End battery current for 240 cells with nominal output load (A) |
(KVA rating of UPS * ƞ(Charger) * ƞ(Inverter)* ƞ(Isolation x’mer(if used)) * ƞ(Cable loss)) / 396 |
Major Highlights on Specification (25KVA to 500 kVA UPS)
INVERTER OUTPUT
| Apparent nominal power @40°C ambient temperature, lagging or leading load PF |
KVA rating of UPS |
| Nominal active power (kW) | KVA rating of UPS * ƞ (efficiency of UPS ) |
| Nominal output current per phase (A) | (KVA rating of UPS * ƞ (efficiency of UPS )) / Nominal AC voltage |
| Maximum active power up to 100% of nominal apparent power(7) (kW) |
KVA rating of UPS * ƞ (efficiency of UPS ) |
| Overload at nominal output voltage for 10 minutes (%) | 125 |
| Overload at nominal output voltage for 1 minute (%) | 150 |
| Short circuit current for 10ms / <5s (%) | 300/150 |
| Nominal output voltage (V) | 415 , (3ph+N) |
| Nominal output frequency (Hz) | 50 (60 selectable) |
|
Voltage stability in steady state condition for input (AC & DC) variations and step load (0 to 100%) (%) |
+/- 1 |
|
Voltage stability in dynamic condition for input variations (AC & DC) and step load (0 to 100% load and vice versa) (%) |
Complies with IEC/EN 62040-3, Class 1 |
| Voltage stability in steady state for 100% load imbalance (0, 0, 100) (%) |
±3 |
| Output frequency stability | +/- 6% selectable |
| - synchronized with bypass mains (%) - synchronized with internal cl (%) |
±0.1 |
| Frequency slew rate (Hz/sec) | <1 |
| Output voltage distortion with 100% linear load (%) | <2 or 3 |
| Output voltage distortion @ reference non linear load as for IEC/EN 62040-3 (% |
<5 or 6 |
| Load crest factor handled without derating the UPS (Ipk/Irms) |
3:1 |
|
Phase angle accuracy with balanced loads (degrees) |
<1 |
|
Phase angle accuracy with 100% unbalanced loads (degrees) |
<3 |
|
DC/AC Inverter efficiency @ nominal input conditions with nominal resistive load(1) - Half load ≥(%) - Nominal load ≥(%) |
95 to 96.9 96 to 97.2 |
| Neutral conductor sizing | 1.7 nominal current |
|
Nominal output power upgrading with ambient temperature: - At 25°C(%) - At 30°C(%) - At 40°C(%) |
110 105 100 |
Major Highlights on Specification (25KVA to 500 kVA UPS)
STATIC BYPASS
| Nominal voltage (V) | 415 , 3ph+N) |
| Nominal frequency (Hz) | 50/60 (selectable) |
| Frequency range (%) | +/- 6% selectable |
| Voltage range (%) | ±10 (5 to 15 selectable |
| Maximum overload capacity - For 10 minutes (%) - For 1 minute (%) - For 600 milliseconds (%) - For 100 milliseconds (%) |
125 150 700 1000 |
| Transfer time with inverter synchronous to bypass: - Inverter to Bypass (ms) - Bypass to Inverter (ms) |
< 4mSec < 4mSec |
|
Transfer time with inverter not synchronous to Bypass (ms) |
<20 |
SYSTEM DATA
| AC/AC efficiency without charging current @ nominal input conditions(1) (2) with resistive load: - 25% load (%) - 50% load (%) - 75% load (%) - 100% load (%) - ECO Mode (%) |
91.0 93.8 94.4 94.5 98.0 (Note: Results may vary from KVA-to-KVA and other component selections) |
| Noise @ 1 metre as per ISO 3746 (dBA ± 2dBA) | 72 |
| Protection degree with open doors | IP20 (higher degree of protection available on request) |
| Mechanical dimensions: - Height (mm) - Width (mm) - Depth (mm) |
Can vary as per user demand and KVA rating |
| No. of cabinets | Depending on KVA rating |
| Frame color(RAL scale) | Depending on user demand |
| Weight | Depends on KVA rating |
| Floor area(m2) | - |
| Floor loading(kg/m2) | - |
| Cable entry | Bottom /side |
| Access | Front and BACK |
| Cooling (m3/h) | Forced ventilation |
| Location | Indoor (free from corrosive gases and conductive dust) |
| Operating temperature(3)(°C) | 0 - 40 |
| Storage temoerature (°C) | 0 - 60 |
| Maximum relative humidity @ 20°C (non condensing)(%) |
Up to 95% |
| Max altitude above sea level without derating (m) | 1000 (for higher altitudes complies with IEC/EN 62040-3) |
| Immunity to electrical interference | IEC/EN 62040-2 |
| EMC Class | IEC/EN 62040-2 Class C3 |
Major Highlights on Specification (25KVA to 500 kVA UPS)
- 1) For tolerances see IEC/EN 60146-1. The data refers to 25°C ambient temperature.
- 2) At nominal voltage and frequency.
- 3) Recommended average daily ambient temperature 35°C with a maximum of 40°C for 8 hours as requested for 62040 standards
- 4) In the case of a split input configuration, the primary input and the bypass input must have a common neutral. The neutral conductor may be connected only to the bypass or to primary mains, but it must be present (bypass and primary neutrals are connected inside the UPS).
- 5) Referred to 70% of nominal load.
- 6) With input voltage at nominal value and voltage distortion THD 1%.
- 7) Nominal apparent power loads with PF > 0.9 can be supplied with marginal limitation of other performances. Please contact the Technical Support team for further information.
General conditions for the Technical Data table:
The data shown are typical and not definable in other ways; furthermore, the data refer to 25°C ambient temperature and nominal output power where not specified. Not all the data shown apply simultaneously and may be changed without prior warning. Data apply to the standard version, if not otherwise specified.
If options are added, the data shown in the Technical Data Table may vary. For test conditions and measurement tolerances not specified in the table refer to the Witness Test Report procedure.
“All Product Names, Logos, and Brands are Property of their respective Owners. All Company, Product and Service names used in this catalog are for identification purposes only. Use of these Names, Logos and brands does not imply endorsement.”
{/*Terms & Conditions of usage
*/} {/*The data contained in this product data sheet is exclusively intended for technically trained staff. Technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application.
This product data sheet is describing the characteristics of this product for which a warranty is granted. Any such warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its characteristics.
Should you require product information in excess of the data given in this product data sheet or which concerns the specific application of our product, please contact the sales office, which is responsible for you (see www.paramvirpower.com). For those that are specifically interested we may provide application notes.
Due to technical requirements our product may contain dangerous substances. For information on the types in question please contact the sales office, which is responsible for you.
If and to the extent necessary, please forward equivalent notices to your customers.
Changes of this product data sheet are reserved.
Safety Instructions
Prior to installation and operation, all safety notices and warnings and all warning signs attached to the equipment have to be carefully read. Make sure that all warning signs remain in a legible condition and that missing or damaged signs are replaced.
Even for customer-specific products, conclusive validation of the component in the circuit can only be carried out by the customer.
*/}ASL 220221024 : SCR Firing Controller
FEATURES
- No Need of Pre-charge in half controlled Circuit.
- Mainly used in 6-Pulse & 12-Pulse SCR firing Rectifier.
- Field Proven, Reliable & rugged Controller tested up to 2.0 MW.
- On board DC Voltage Feedback with Soft Turn ON.
- Line current Sensing for monitoring & trip
- Six Digital Input & One Relay output for Alarm.
- More than 0.99 Power Factor with half controlled SCR firing.
- Hardware & Software based trip Setting.
- Optional HMI Interface.
- High Voltage, Low Voltage, DC Short, Phase Lost Indication for fault debugging.
- LED INDICATION:
Product Ordering Code :
ASL 220221024
DIMENSIONS
SOFT : Green (Blinking: Soft start Mode, OFF: Completion)
LVDC : YELLOW (ON : Low DC Voltage)
DC_SHORT : RED (ON : DC short)
OC_AC : RED (ON : Line Current Over load)
OVDC : RED (ON : Over DC voltage)
CAP_V : RED(ON : phase loss)
EXT_TRIP : RED (ON : Digital inputs fail)
*/} {/*
ASL 220221032 : SCR PT
FEATURES
- Capable to Drive up to 2400A 3000V SCR Module.
- Soft & Hard Firing Pulse Transformer for Phase controlled SCR.
- Standard 5.0KV Isolation & expandable up to 10KV.
- High dv/dt & di/dt for fast current spreading over SCR.
- 18-0-18V AC / +24V DC Power supply input to Drive.
- 10-Pin FRC Interface with ASL 220221024, ASL 220221040.
Product Ordering Code :
ASL 220221032
DIMENSIONS
“All Product Names, Logos, and Brands are Property of their respective Owners. All Company, Product and Service names used in this catalog are for identification purposes only. Use of these Names, Logos and brands does not imply endorsement.”
*/} {/*
Terms & Conditions of usage
The data contained in this product data sheet is exclusively intended for technically trained staff. Technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application.
This product data sheet is describing the characteristics of this product for which a warranty is granted. Any such warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its characteristics.
Should you require product information in excess of the data given in this product data sheet or which concerns the specific application of our product, please contact the sales office, which is responsible for you (see www.paramvirpower.com). For those that are specifically interested we may provide application notes.
Due to technical requirements our product may contain dangerous substances. For information on the types in question please contact the sales office, which is responsible for you.
If and to the extent necessary, please forward equivalent notices to your customers.
Changes of this product data sheet are reserved.
Safety Instructions
Prior to installation and operation, all safety notices and warnings and all warning signs attached to the equipment have to be carefully read. Make sure that all warning signs remain in a legible condition and that missing or damaged signs are replaced.
*/} {/*
Even for customer-specific products, conclusive validation of the component in the circuit can only be carried out by the customer.
- dsPIC33, 16-bit High Speed CPU with Integrated DSP
- USB 2.0 OTG-Compliant Full-Speed Interface
- 16 PWM Channel with 8.32 ns Resolution
- Capable to generate 12 PWM for Parallel Inverter.
- Capable to Generate Half & Full Control Pulse for SCR Firing.
- Ethernet for data monitoring & data analysis in High Power (2MW) system.
- High Speed USB 2.0 OTG-Compliant for Fault log.
- POE in case of firmware up gradation.
- RS-485 for interface with Energy meter for peak power demand control.
- RS-485 for LCD or touch screen interface.
- Universal Modbus Protocol implemented for HMI Interface.
- Universal Modbus Protocol implemented for HMI Interface.
- Signal Conditioning of DC Voltage, Current, AC Voltage & current along with IGBT NTC temperature feedback.
- Real time Clock Implemented.
SPECIAL CONTROL CARD FEATURES
- 70 MIPS Speed
- 536K Program Flash Memory
- 122: I/O Pins, 9: 16-Bit Timer
DIMENSIONS
- Overall Size (in mm) : 240 x 150
- Mounting Hole pitch (in mm) : 230 x 140
